When hosting group sessions (retreats, wellness events, or sound baths), you can choose between wireless or wired configurations.
Crucial Note: For all wireless options, ensure the equipment supports a frequency response of 20Hz – 20kHz to maintain the full haptic experience.
Option 1: Wireless – FM System (Budget Friendly)
One receiver per Woojer unit, with a dedicated 3.5mm cable. Low price, though there is some low-quality equipment on the market. When choosing this configuration, it is important to make sure the frequency response is 20Hz - 20KHz.
Setup: Sound mixer / Audio source out → transmitter audio in, receiver out → MAT audio in.
Hardware Example:
Option 2: Wireless – Professional In-Ear Monitor (IEM) (Pro Level)
Highly stable for larger events (10m+ distance) or setups involving up to 50 connections. This is the preferred choice for professional high-density environments.
Setup: Sound mixer / Audio source out → transmitter audio in → receiver out / headphone out → MAT audio in.
Hardware Example: https://www.aliexpress.us/item/2255800500860924.html
Option 3: Wireless – Headphone Transmission (Standard Wireless)
A high-quality wireless audio transmission option that provides a balance between ease of use and professional audio fidelity.
Setup: Sound mixer / Audio source out → transmitter audio in → receiver out / headphone out → MAT audio in.
Hardware Example: https://www.aliexpress.us/item/3256808324170676.html
Option 4: Wireless – Silent Disco Configuration (Simple to Use)
In this configuration, the headphones selected must have a 3.5mm output jack, as this will be wired into the audio input of the MAT. This utilizes the headphones for both user audio and the input to the Woojer device.
Setup: Sound mixer / Audio source out → Silent Disco transmitter → Wireless headphones → 3.5mm cable from headphone out → MAT audio in.
Hardware Example: https://www.aliexpress.us/item/3256808207529619.html
Option 5: Full Wired Setup (Highest Fidelity)
The most reliable and stable option for stationary sessions where you want to ensure zero interference or latency.
Setup: Headphone out to MAT audio in. In case you need more than 10 units, connect another amplifier to the last headphone exit of the first amplifier. Make sure you have 3.5mm cables and Male stereo 6.5mm to stereo female 3.5mm adapters per output.
Hardware Example: https://www.aliexpress.us/item/3256808368157167.html
Quick Connection Checklist
Cables: One 3.5mm Male-to-Male cable for every Woojer unit.
Adapters: 6.5mm (1/4") Stereo Male to 3.5mm Stereo Female adapters for your mixer or amplifier outputs.
Mobile Sources: If using an iPhone or USB-C device, you will need a USB-C to 3.5mm adapter.
Microphone: Use a small mixer to blend your voice with the music before it reaches the transmitter.